Recently, have you noticed an odd, moldy scent within your house, yet not successful with the identification of its source? If you are experiencing this, it is likely that your air conditioner is spreading this smell.
Contact a professional immediately if you observe mold anywhere near your air conditioning or HVAC system. DIY mold removal Chicago is a terrible idea. This should only be performed by professionals. It may seem strange and improbable but the mold has a tendency to grow within air conditioners that are not being used.
Although this sounds frightening, take a deep breath. Mold issues can be solved relatively quickly and without the need for AC unit replacement. Reda below to find out about the steps towards simple mold remediation in Chicago.
Be sure the air conditioner is your problem
First of all, it is important to ensure that both the odor and the mold actually originate in your air conditioner. You can stand as near to the unit as you can in order to immediately determine if the smell is coming from your air conditioner, based on its strength.
If you suspect that the odor is caused by your air conditioner, you should first try turning it off. This makes sure any additional mold is unable to enter your air and trigger breathing issues for you and your family.
But, below are several steps you can take to impede mold from spreading further.
Clean mold from air conditioning: A simple guide
1. Inspect your damages
The following step in the process of mold removal is opening your air conditioner’s grill cover. Although many covers can be easily snapped open, certain unit covers require screwdrivers for their removal. After the cover of an AC unit has been removed, the unit can be inspected with the help of a flashlight.
Mold is easily identifiable. It is generally found as black, brown, or greenish spots all over the AC’s interior. If you only see several mold streaks on the interior walls, it is ok to clean it yourself.
But, if more than 1/3 of your unit’s interior is covered with mold, you are likely better off contacting professionals for expert mold remediation in Chicago. If this is the case, such experts are the only ones possessing the necessary knowledge and proper equipment to provide proper mold removal.
2. Cleaning time.
Based on the mold amount, it is probable that AC unit disassembly will be necessary for appropriate cleaning. Follow the accompanying instructions to ensure this is correctly performed.
Use a vacuum to eliminate debris or dust within your unit. A nozzle attachment may be utilized to simplify this step. Purchase a coil cleaner and spray the coils with it, allowing it to dissolve dirt from any areas where it is present. Follow the timing stipulated on the bottle of cleaner then use a standard garden hose to remove cleaner from the unit’s coils.
Lastly, add several gallons of water to a bucket then pour in a half cup of bleach as well. The household bleach makes sure no mold spores are left. Don’t forget your safety goggles and gloves for personal protection during the cleaning process.
3. Allow for drying
Let your AC completely dry prior to its reassembly. This takes approximately 24 hours in most cases.
Require assistance with your home’s mold?
In many cases, you are better off leaving this complicated matter to the professionals of mold removal companies in Chicago. If you suspect your home contains mold and you would like to remedy it, reach out toSimply Gone Mold.